Overview

Dulux Heritage Velvet Matt is a luxurious water-based emulsion paint made with the finest quality pigments which create superb depth of colour. The specially blended clays make the paint very easy to apply and the finish soft to the touch. The Dulux Heritage colour palette has been carefully selected, by taking inspiration from the most beautiful periods in the history of British design.

Wide range of colours
Excellent opacity
Durable and washable
Soft to touch finish

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	Walls, Drywall, Ceilings
Base	Water-Based
Coverage	Up to 13m2 per litre
Drying Time	Dependent on temperature and humidity
Re-Coat Time	2 - 4 Hours
Recommended Coats	2 Coats
Application Method	Brush, Roller
VOC Levels	Low
Clean Up	Remove as much paint as possible from the equipment before cleaning with water

Preparation

To get the best results, ensure the surfaces to be painted are sound, clean, and dry (new surfaces particularly must be fully dry).

Remove all loose and defective paint to create a sound surface
Where necessary wash the surface to remove dirt, grease, and powdery or dusty residue, rinse with clean water and allow to dry
Seal any powdery surfaces with an appropriate plaster sealer
Any holes, cracks, or surface defects should be filled with an appropriate filler
For new or bare or absorbent services seal with an appropriate Dulux or Dulux Trade paint before painting
Where necessary, rub down and then wipe off with a damp, lint-free cloth to avoid dust

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

Stir thoroughly before use to ensure the paint is completely mixed.
Do not apply in temperatures below 7°C
For best results use a good quality short pile microfibre roller when applying to walls and ceilings
Apply 2 full coats on previously coated or suitably primed surfaces allowing 2-4 hours to dry between coats
It is not recommended to spray this product

Note: Always follow the manufacturer's instructions found on the tin.